Can I Run 3/4 Pex To Shower

There are a lot of factors to consider when trying to determine if you can run 3/4 pex to your shower. The first thing you need to consider is the flow rate of your shower. The average shower has a flow rate of 2.5 gallons per minute, so you would need to make sure that your pex can handle that flow rate.

Another factor to consider is the pressure of your water. If you have a high pressure system, you may need to use a larger diameter pex to avoid having your shower burst. You also need to make sure that your pex is rated for hot water if you’re going to be using a hot water heater.

Lastly, you need to make sure that your pex is installed properly so that it doesn’t leak.

How to Size PEX Pipe for Home Plumbing

What kind of PEX do you use in a shower?

There are three types of PEX that can be used in a shower: Type A: This type of PEX is used for the main water lines in a home. It is the most durable and can withstand higher temperatures and pressures.

Type B: This type of PEX is used for the hot water lines in a home. It can withstand higher temperatures than Type A, but not as high as Type C. Type C: This type of PEX is used for the cold water lines in a home.

It can not withstand as high of temperatures as the other two types, but is still durable.

Can PEX be used as a shower supply?

Yes, PEX can be used as a shower supply line. PEX is a great option for shower supply lines because it is durable and flexible. PEX is also less likely to burst or leak than other types of pipe.

What size PEX should I use for bathroom?

There is no definitive answer to this question as the size of PEX tubing will vary depending on the specific needs of the bathroom in question. However, some general guidelines that can be followed when choosing the right size PEX tubing for a bathroom include: -The first step is to determine the maximum water flow rate that will be required in the bathroom.

This can be done by estimating the maximum number of fixtures that will be used simultaneously and then multiplying that by the flow rate of each fixture. -Once the maximum water flow rate has been determined, the next step is to choose a PEX tubing size that can accommodate that flow rate. For example, if the maximum water flow rate is 9 gallons per minute (gpm), then a 1/2-inch PEX tubing would be sufficient.

-It is also important to consider the length of the runs when choosing the right size PEX tubing. For example, a 1/2-inch PEX tubing would be adequate for a run of up to 100 feet, but a 3/4-inch PEX tubing would be needed for a run of 150 feet or more. -Finally, it is always best to consult with a qualified plumbing professional to ensure that the chosen PEX tubing size is appropriate for the specific bathroom in question.

Is 3/4 PEX big enough?

If you’re considering using PEX piping for your home’s plumbing, you might be wondering if 3/4 inch PEX is big enough. The short answer is that it depends on what you’re using it for. For most typical home plumbing applications, 3/4 inch PEX is more than sufficient.

However, if you’re looking to use PEX for larger applications such as irrigation or hydronic heating, you’ll need to use a larger size. For those applications, 1 inch PEX is typically the minimum size that should be used. So, in summary, 3/4 inch PEX is usually big enough for home plumbing applications.

But if you’re looking to use it for something larger, you’ll need to go with a larger size.

can i run 3/4 pex to shower


How many fixtures on 3/4 pex

When it comes to plumbing, more is not always better. In fact, when it comes to the question of “how many fixtures on 3/4 pex,” the answer is fairly straightforward: no more than four. Why is this the case?

It has to do with the amount of water that can flow through a given pipe. A 3/4″ pex pipe can handle a maximum flow rate of 8 gallons per minute. This means that, when all four fixtures are in use, each one is limited to a flow rate of 2 gallons per minute.

While this may seem like a small amount, it is actually more than enough for most applications. For example, a shower will typically use between 1 and 2 gallons per minute, and a toilet will use between 0.5 and 1 gallon per minute. So, even with all four fixtures in use, there will still be plenty of water pressure for a comfortable experience.

Of course, this is not to say that you can never have more than four fixtures on a 3/4″ pex pipe. If your fixtures have a low flow rate, or if you only use them occasionally, you may be able to get away with more. However, if you have a high-demand application, or if you use all four fixtures frequently, it is best to stick to the four-fixture limit.

3/4 vs 1” pex

If you’re looking at doing any plumbing work in your home, you’ll likely come across two different types of pex tubing – 3/4 inch and 1 inch. So, what’s the difference between the two and which one should you use for your project? 3/4 inch pex tubing is the most common type used in residential plumbing.

It’s typically used for smaller projects, like running supply lines to fixtures or connecting to an existing water line. 1 inch pex tubing is typically used for larger projects, like running a main water line or supplying a large volume of water. So, which one should you use for your project?

It really depends on the size and scope of the project. If you’re not sure, it’s always best to consult with a professional before beginning any work.

Pex to shower valve

If you’re looking to replace your old shower valve, there’s a good chance you’ll be considering a PEX to shower valve. PEX valves are becoming increasingly popular in new construction and remodeling projects, thanks to their durability and easy installation. But what exactly is a PEX to shower valve, and how does it differ from other types of valves?

A PEX to shower valve is a valve that is specifically designed for use with PEX piping. PEX, or cross-linked polyethylene, is a type of plastic piping that is resistant to both heat and corrosion. It’s often used in plumbing and radiant heating applications, and is becoming more common in residential construction.

PEX to shower valves are available in a variety of styles and configurations. The most common type is the compression fitting, which uses a rubber gasket to create a seal between the valve and the PEX piping. There are also crimp-style fittings, which use a metal band to secure the valve to the piping.

Either type of fitting can be used with either PEX or copper piping. PEX to shower valves are typically made of brass, although they can also be made of plastic or other materials. Brass valves are the most durable, but plastic valves are often less expensive.

When choosing a PEX to shower valve, be sure to select one that is rated for the maximum water pressure in your home.


If you’re wondering if you can run 3/4 pex to your shower, the answer is yes! Pex is a great material for plumbing because it’s durable and easy to work with. However, you will need to use a few more fittings than you would with other materials.

Leave a Comment

five × one =